|
Curves
Sept 10, 2014 11:19:04 GMT
Post by lilone on Sept 10, 2014 11:19:04 GMT
Hi All,
I've been thinking for a while now (an unusual thing for me !) about doing a layout using something other than Peco and found out about FiNetrax thought I'd check it out etc but every picture I see is always straight track -with the exception of the turnouts.
I would love to build something-and do have a plan in mind- using FiNetrax but need to see bends
Thanks Steve
|
|
|
Curves
Sept 10, 2014 11:27:29 GMT
Post by Wayne Kinney on Sept 10, 2014 11:27:29 GMT
Hi Steve,
Welcome to the forum.
The FLEXI track bends like peco flexi would as normal.
The turnouts can have their webbing cut and shaped into a slight curve if required, also.
|
|