Post by Wayne Kinney on Jun 20, 2013 15:44:56 GMT
Hi Guys,
Good to hear the jigs arrived.
With the jig, you can now file the switch blades. You will need a good quality file, and also flux and solder (the intended method is to fill the rail recess on the oposite side of filing, with solder to strengthen the rail.
I will post photos and instructions in an hour or so.
Still to come will be 2x cast chairs with pins, and an assembly Jig to solder this cast chairs onto the switch blades. I will also be sending a new tie bar.
Good to hear the jigs arrived.
With the jig, you can now file the switch blades. You will need a good quality file, and also flux and solder (the intended method is to fill the rail recess on the oposite side of filing, with solder to strengthen the rail.
I will post photos and instructions in an hour or so.
Still to come will be 2x cast chairs with pins, and an assembly Jig to solder this cast chairs onto the switch blades. I will also be sending a new tie bar.
